Masonry contractor in Spout Springs, NC - walls, walks and brick that hold up
J&D Fayetteville Concrete and Masonry is a masonry contractor based in Fayetteville, NC that builds and repairs brick, block and stone in Spout Springs, from veneer fronts and front steps to retaining walls, walkways and paver driveways.
Spout Springs homes and the work they need
Spout Springs is a short drive up from us in Fayetteville, and most of what we work on here is newer subdivision housing in Harnett County. The houses tend to share a look: brick or stone veneer across the front, siding on the sides and back, a concrete drive and a short walk to a small stoop. It runs right into Anderson Creek, and the jobs there look a lot like the ones here.
We work well beyond this corner of the county, down to Lumberton and out to the other cities around Fayetteville. Here, though, newer homes shape the job, so less of it is matching old soft mortar and more of it is building walls, walks and veneer right the first time and fixing the cracks that show up as a house settles.
Spout Springs houses and what they ask of masonry
Most houses we work on in Spout Springs are newer subdivision homes, and they wear differently from old brick, so here's what I look at when I walk a yard here.
Most fronts here are brick or stone veneer, and loose or cracked veneer lets water get behind it when it's left alone.
Backyards were graded when each neighborhood went in, and a slope that keeps creeping toward the house is a common reason folks call us.
Front steps and stoops on newer homes can pull away from the house as things settle, and that gap is worth fixing before someone trips.
Many neighborhoods here have an HOA, which usually has its own say on walls, pavers and anything you can see from the street.
Spout Springs isn't its own town, so permits for building or repairing structures here go through Harnett County instead of a town hall.
Price and schedule here usually turn on size, material, access to the yard and any permit, and I'll go over each one when I come out to look.
Where we work, including Spout Springs
We're based in Fayetteville and take jobs in Spout Springs, along with Anderson Creek and Spring Lake close by. The cities below have their own pages, and we work in others nearby too.
Masonry services we offer in Spout Springs
Foundation repair
When a crack shows in the block or brick at the base of your house, we figure out whether it's still moving before we pick a repair.
Chimney repair
Brick chimneys here can crack at the crown, the concrete cap on top, or lose mortar up high, and we fix that before water gets inside.
Tuckpointing
We tuckpoint brick fronts whose joints look worn or hollow, raking out the old mortar and packing in new so the wall sheds water again.
Brick repair
Cracked or loose bricks on a veneer front or mailbox column are usually a small fix, and we match brick and mortar as close as we can.
Driveway pavers
Swapping a plain concrete drive for pavers is a common ask on newer homes, and we pack the base deep enough to carry your cars, not just foot traffic.
Retaining wall construction
When a backyard slope keeps creeping toward your patio or fence line, a block or stone wall with drainage behind it holds the ground where it belongs.
Masonry restoration
When a brick wall or front has years of stains, cracks and mismatched patches, we restore it with mortar and brick that suit what's already there.
Fireplace installation
If your house came without a fireplace, or with a plain one, we can build a masonry fireplace, indoors or out, and plan the chimney with you first.
Stone veneer installation
Stone veneer on a foundation skirt, porch columns or a front wall dresses up a newer house, and we put a drainage layer behind it so water gets out.
Concrete block walls
Block walls suit privacy along a back line, a low garden wall or a raised planter, and we add steel and grout where the height calls for it.
Foundation block wall installation
For an addition, garage or new outbuilding, we lay the block foundation walls square and level on the footing so the framing above starts out right.
Outdoor kitchen masonry
Plenty of backyards here have room for a grill counter or full outdoor kitchen, and we build the block frame and finish it in brick or stone.
Walkway construction
Many newer homes come with a narrow concrete strip from driveway to door, and we can replace it with a wider brick, stone or paver walk.
Brick wall installation
A brick wall at the drive entrance, around a patio or along a front bed ties into a brick-front house, and we pour a footing under it first.
Stone masonry
Natural stone suits front steps, columns, a fire pit or a low yard wall, and we fit each piece by hand so the joints sit tight.
Brick pointing
When only a few joints have cracked or fallen out, say around a stoop or a column, we point just those spots before water gets behind them.
Get a free on-site estimate for your Spout Springs job
Send the form or call, and we'll get back to you within one business day to set a time. I come out to Spout Springs myself, look at the job with you and give you a free estimate right there, with no obligation and no pressure to book.
- Call
- (910) 302-3425
- Hours
- Mon–Fri: 8 AM–10 PM, Sat–Sun: 6 AM–9 PM
Reasons Spout Springs homeowners hire us
I left an office job to learn masonry under an experienced mason, and we've been at it since 2023. Here's what that means for your job, with satisfaction guaranteed on every job.
The owner on every job
I come out to look at every job myself, and I work alongside our crew when we build it, so the person who walked your yard is the one on the wall.
Mortar that suits the brick
We're best known for repair on older brick, and that habit carries over to newer homes, because we match mortar strength and color to your brick instead of grabbing whatever mix is handy.
Permits handled with Harnett County
If your job needs a permit, we get it from the county office and sign for it as your contractor, and when it's not clear, we ask before we start. We're fully licensed and insured.
Spout Springs masonry questions we hear
Do I need a permit for masonry work in Spout Springs, NC?
You may, because Harnett County's Building Inspector issues written permits for building, altering, repairing or removing any building or other structure, and that can include walls, steps and chimneys. The county code we've read is a publisher's copy that may be older than current law, and work here also falls under the North Carolina Residential Code, which the state fire marshal's office says is in effect statewide. When it isn't clear for your job, we ask the county before any work starts.
How do I know if a small brick repair needs a permit in Harnett County?
Under the county code, work totaling $1,000 or less needs no building permit as long as it changes no structural parts of stairways or other exits. A few cracked bricks on a wall may sit under that line, but structural work on your front steps wouldn't, whatever it costs. Since that code copy may not be current, we confirm yours with the county first.
How do I apply for a building permit in Spout Springs, NC?
For a residential project, you email the application as PDF attachments to Harnett County Central Permitting at centralpermitting@harnett.org, with the property address or PIN in the subject line. Only a couple of narrow permit types can be finished online, so most masonry permits go by email. On our jobs, we file it and sign for it, so you don't have to.
Do I need a permit to build a brick wall or fence in Spout Springs?
Harnett County's planning office says the county doesn't regulate fences on residential lots or require fence permits, but a fence still has to stay out of any easement or right-of-way and clear of the 10-by-70-foot sight triangle NCDOT requires so drivers can see. A brick or block wall is also a structure a building permit can cover, so we check with the county on yours before we build. Your HOA may have its own rules too, and those are worth asking about early.
Does my masonry project in Spout Springs need a lien agent?
Usually not for a homeowner, because the county's rule for building permits on work costing $40,000 or more leaves out improvements to an existing single-family home you live in and the accessory buildings that go with it. When the rule does apply, the permit or an attachment has to list contact details for the lien agent you choose.
How much does masonry work cost in Spout Springs, NC?
The price comes down to the size of the job, the material you pick and how much prep the ground needs, so I give you a figure once I've seen it. Brick and natural stone usually run more than block or pavers, tearing out an old walk or wall adds labor, and an open path to the backyard keeps things simpler. Call or send the form and I'll come take a look.
Call about your Spout Springs masonry job
We're open until 10 PM on weekdays and from 6 AM on weekends, so call (910) 302-3425 when it suits you, or send the form any time.
Mon–Fri: 8 AM–10 PM, Sat–Sun: 6 AM–9 PM