J&D Fayetteville Concrete and MasonryJ&D Fayetteville Concrete and Masonry

Masonry Contractor in Spring Lake, NC - Older Brick Repaired Right

J&D Fayetteville Concrete and Masonry is a masonry contractor based in Fayetteville, working in Spring Lake, NC on brick repair, tuckpointing, chimneys, foundations, retaining walls, walkways and driveway pavers for homeowners.

A broad gray paver patio in front of a dark-sided house, with stone steps, a fire pit, and a black lamp.

Spring Lake homes and the masonry they need

Spring Lake is a short drive from our base in Fayetteville, and most of our work here is on houses. We see brick homes with worn joints, block foundations, brick steps and chimneys, and newer houses with brick or stone fronts.

Our calls here are a lot like the ones we get in Anderson Creek and Spout Springs, and over in Dunn: a cracked wall, a leaky chimney, or a homeowner who wants a new walk or driveway built right. On an older house, the job turns on what's already there, how old the brick is and what the last repair used. On a newer one, it's more often about what's behind the veneer and how the yard drains toward the house.

Spring Lake houses and what we find on them

These are the things I see most when I walk a Spring Lake property, and they're why masonry here often needs more than a quick patch.

  • Brick homes with mortar joints worn back or crumbling are a common call, because open joints let water work into the wall.

  • Cracked or shifting brick steps, stoops and garden walls show up often, so we look for what moved before we patch anything.

  • Chimneys that leak into a ceiling usually need the crown and top courses of brick checked up close, not just a bead of caulk.

  • Cracks in block foundations and crawlspace walls need someone to judge whether it's old settling or something still moving.

  • The Town of Spring Lake calls for a permit whenever work is done on a building or its systems, with a few exceptions, so we sort that out first.

I check each of these on a visit, because they decide what your work costs and when we can start, along with any permit the city needs first.

Spring Lake and the cities around it

We're based in Fayetteville and work in Spring Lake and the cities around it, including Hope Mills and Anderson Creek. The cities below have their own pages, and we work in others nearby too.

Masonry services for Spring Lake homes

Get a free on-site estimate in Spring Lake

Send us the form and we'll reply within one business day to set a time that works for you. I come out to your Spring Lake property myself, look over the work and give you a free estimate on site. There's no obligation to book.

Hours
Mon–Fri: 8 AM–10 PM, Sat–Sun: 6 AM–9 PM

Why Spring Lake homeowners call us

Good masonry is meant to last a long time, so I'd rather slow down and explain your options than rush the job. Here's what that looks like when you hire us.

  • The owner on every job

    I learned masonry working under an experienced mason and started this business in Fayetteville in 2023. I come out to look at every job myself and work alongside our crew while it's built.

  • New mortar that suits old brick

    Repair on older brick is what we're best known for. Mortar that's harder than the old brick can crack it, so we match the mix to your house instead of using whatever's quickest.

  • Permits handled, work guaranteed

    We're fully licensed and insured, and if your job needs a permit, we handle it with the city and sign as your contractor. Satisfaction guaranteed on every job. Call (910) 302-3425 to get started.

Spring Lake masonry questions we hear

How do I find out if my masonry job needs a permit in Spring Lake?

Ask the city's Inspection Department, because it issues permits for building work and its no-permit list covers things like flooring, trim, cabinets and same-material roofing, not masonry. If your job needs a permit, we take care of it and sign as your contractor, and if it isn't clear, we check with the department before we start. You can also reach Town Hall at (910) 605-1634.

What license does a contractor need to get a permit in Spring Lake, NC?

Each contractor and subcontractor on a Spring Lake permit has to hold a valid North Carolina license for their part of the work. The permit application asks for every contractor's name, address and state license number, and we put ours on it when we pull your permit.

How tall can a brick wall be in my front yard in Spring Lake?

Under the city's rules, a solid wall or fence in the minimum front yard, the setback strip along the street, can be three feet tall at most, and it can reach six feet in the minimum side or rear yard. Within 25 feet of a public right-of-way line, a solid wall stays at three feet or less, while an open fence can be any height. I'll go over where your lines fall before we lay out a new wall.

How long does a building permit last in Spring Lake?

A Spring Lake permit becomes void if work hasn't started within six months of when it's issued, or if work stops for a year after starting. That's why we time the permit for when we're close to starting your job, not months ahead.

Who schedules inspections for a masonry job in Spring Lake?

All inspections are scheduled through the city's inspection office, even when Cumberland County inspectors help out with some of them. The city's online Customer Portal handles inspection requests and status checks, and when we hold the permit, we request the inspections for you.

How much does masonry work cost in Spring Lake, NC?

The cost of masonry work in Spring Lake comes down to the size of the job, the brick, block or stone you choose and what we find once old work is opened up, so I give you a figure after I've seen it in person. Matching old brick, building on a slope or needing a permit can add to it, while a small repair caught early usually costs less than one that's been left to spread.

Talk to us about your Spring Lake project

We pick up the phone seven days a week, so call (910) 302-3425 or use the form while that crack or loose brick is still small and easier to fix.

Mon–Fri: 8 AM–10 PM, Sat–Sun: 6 AM–9 PM

(910) 302-3425Request an estimate